Latvia Birch Plywood Factory Starts Production: BB/BB, B/BB and BB/CP Grades

Latvia Birch Plywood- Inside a 100% Birch Plywood Manufacturing Factory in Latvia
November 7, 2026

Factory Production Journal – November 2026

SIA 58Northwood is progressing with the manufacturing of 100% birch plywood at its factory in Latvia.

Our current production programme focuses on BB/BB, B/BB and BB/CP grades.

The production process includes birch veneer preparation, panel lay-up, hot pressing, trimming, sanding, finished-panel inspection and packing.

As the factory develops its daily production routines, we are continuing to monitor manufacturing conditions, product specifications and quality inspection procedures.

This journal shares factual updates from our manufacturing activities and will be updated as production progresses.

Factory Production Journal | 58Northwood | Latvia | November 2026

58Northwood has started production of 100% birch plywood at its manufacturing facility in Latvia. Our production activities are now progressing through the daily manufacturing process, with a focus on three main product grades: BB/BB, B/BB and BB/CP.

This is an important stage in the development of our Latvian birch plywood manufacturing project. Our objective is to establish a consistent production process for full birch plywood, using birch veneer for both face and core layers.

Through this production journal, we will share updates from our factory, including manufacturing activities, production progress, product grades, quality inspection and the development of our quality management and compliance procedures.

1. Production of 100% Birch Plywood in Latvia

Our factory is located in Latvia, where birch is an important regional timber resource.

The production concept at 58Northwood is based on integrated birch plywood manufacturing, rather than purchasing finished plywood from other manufacturers for resale.

Our manufacturing process covers the main stages of plywood production, including:

  • Birch log preparation and selection
  • Rotary peeling of birch logs
  • Birch veneer drying
  • Veneer grading and selection
  • Core and face veneer preparation
  • Glue application and lay-up
  • Hot pressing
  • Panel trimming and sizing
  • Surface sanding
  • Finished panel inspection
  • Packing and preparation for shipment

The aim is to maintain control over the main manufacturing stages and develop a reliable production process for European and international customers.

2. Three Birch Plywood Grades Now in Production

Our current production programme includes three commonly requested surface grades.

Birch Plywood BB/BB

BB/BB is a grade combination for customers who require a similar appearance on both sides of the plywood panel.

Typical applications may include furniture components, interior manufacturing, joinery, decorative projects and other applications where both panel surfaces are visible.

Birch Plywood B/BB

B/BB combines a B-grade face with a BB-grade reverse.

This grade is intended for applications where a higher-quality appearance is required on the main face, while the reverse side has different visual requirements.

Potential applications include furniture production, interior components, cabinetry and other woodworking projects.

Birch Plywood BB/CP

BB/CP combines a BB-grade face with a CP-grade reverse.

It provides another option for customers who have different surface requirements for the front and reverse sides of a panel.

Potential applications include general woodworking, industrial components, furniture parts and other projects where the specified surface quality is suitable.

Important: Actual surface characteristics, permitted repairs, knots and other grading details should be confirmed against the agreed product specification and approved reference samples. Grade descriptions and acceptance criteria may vary between buyers and markets.

3. Daily Factory Production Activities

Starting production is only one part of establishing a reliable plywood manufacturing operation. Maintaining stable manufacturing conditions and monitoring each production stage are equally important.

Our daily factory activities focus on the following areas:

Birch Veneer Preparation

Birch veneers are prepared for plywood manufacturing. Veneer thickness, moisture condition and visual characteristics are important considerations during preparation.

Veneer Selection and Lay-up

Face and core veneers are selected and arranged according to the intended panel construction and product specification.

Hot Pressing

The assembled panels enter the hot-pressing process. Pressing conditions, including temperature, pressure and pressing time, need to be managed according to the production requirements.

Trimming and Sanding

After pressing, panels proceed through the finishing stages, including dimensional trimming and surface sanding, as required.

Finished Product Inspection

Finished panels are checked against the applicable production specifications. Inspection considerations include dimensions, thickness, surface appearance, panel condition and other agreed requirements.

Packing and Shipment Preparation

After inspection, accepted panels are prepared for packing and shipment according to customer requirements.

We will continue documenting these activities through factory photographs, production videos and future journal updates.

4. Production Progress and Manufacturing Development

Our current priority is to establish a stable daily production routine and improve consistency across the manufacturing process.

As production progresses, we will continue working on:

  • Improving veneer preparation and utilization.
  • Monitoring moisture conditions during production.
  • Maintaining consistency in panel thickness and dimensions.
  • Improving surface quality and sanding consistency.
  • Monitoring bonding and pressing performance.
  • Strengthening finished-product inspection procedures.
  • Developing production documentation and traceability records.

We believe that reliable manufacturing requires continuous monitoring, practical experience and improvements at every stage.

Rather than making unsupported claims about production performance, we prefer to share actual manufacturing developments as they take place.

5. Certification and Product Testing Status

58Northwood is working on the relevant certification, compliance and product-testing procedures for its target markets, including Europe.

Current status: Applications, preparation and testing procedures are in progress.

These standards and certification schemes have different scopes and applicability. The relevant requirements will be determined according to the intended product, application and target market.

At the time of this publication, the relevant certifications and test documentation have not yet been completed or issued.

We will update this page when the corresponding applications, inspections, testing and certification procedures have reached verifiable milestones.

We do not claim to hold certificates or approvals that have not yet been officially obtained.

6. Working with European Birch Plywood Buyers

We understand that European plywood buyers need more than a product description.

They need reliable information about manufacturing origin, raw materials, product construction, surface grades, dimensions, quality requirements and supporting technical documentation.

At 58Northwood, we welcome enquiries from:

  • Plywood importers and distributors.
  • Timber and wood panel wholesalers.
  • Furniture manufacturers.
  • Industrial plywood users.
  • Joinery and woodworking companies.
  • Construction material suppliers.

Buyers are welcome to discuss their requirements for BB/BB, B/BB and BB/CP birch plywood, including panel thickness, dimensions, surface quality, bonding requirements, packaging and destination markets.

Specific product specifications and commercial conditions can be discussed directly with our sales team.

7. Follow Our Birch Plywood Factory Production Journal

This page will serve as an ongoing record of our manufacturing development in Latvia.

Future updates may include:

  • Daily birch plywood production activities.
  • New factory and equipment photographs.
  • Birch veneer preparation and processing.
  • Hot pressing and sanding operations.
  • BB/BB, B/BB and BB/CP product updates.
  • Finished plywood inspection.
  • Production capacity development.
  • Product testing and certification progress.
  • Factory development and future production plans.

We believe that transparency and consistent communication are important when building long-term relationships with international buyers.

58Northwood – 100% Birch Plywood Manufacturing in Latvia.

For product enquiries, technical specifications and purchasing discussions, please contact:

Email: amy@58northplywood.com

Website: https://58northplywood.com/

Factory Location: Latvia, European Union.

58Northwood is committed to developing its own birch plywood manufacturing operations in Latvia and sharing factual updates about its production progress, product development and compliance procedures.

Start Your First Trial Order with 58Northwood

Looking for a reliable source of 100% Birch Plywood from Latvia?

SIA 58Northwood welcomes enquiries from plywood importers, distributors and industrial buyers interested in evaluating our products.

We invite potential buyers to discuss:

  • Required plywood thickness and dimensions.
  • BB/BB, B/BB or BB/CP surface grades.
  • Face and core veneer construction.
  • Product samples and quality requirements.
  • Trial order quantities and packaging specifications.
  • Inspection and shipment arrangements.

Whether you are evaluating a new European plywood supplier or planning your 2027 purchasing programme, our sales team is ready to discuss your requirements.

Contact our sales team:

amy@58northplywood.com

REQUEST A TRIAL ORDER QUOTATION

SIA 58Northwood | Latvia

Leave a Reply

Your email address will not be published. Required fields are marked *