Factory Production Journal | SIA 58Northwood | Latvia | November 10, 2026
At SIA 58Northwood, our focus is straightforward: manufacturing 100% birch plywood in Latvia, with birch veneer used throughout the entire plywood construction.
We are a manufacturing factory, not a plywood trading company.
Our production activities cover the main stages of plywood manufacturing, starting with birch log selection and in-house rotary peeling, followed by veneer drying, grading, plywood assembly, hot pressing, sanding, quality inspection and packing.
For international plywood buyers, however, choosing a manufacturer involves more than looking at factory photographs or comparing prices.
Buyers need to understand the raw material, veneer construction, product specifications, bonding system, quality control procedures, traceability, packaging and export documentation.
In this production journal, we take a closer look at these important questions from the perspective of a 100% birch plywood manufacturer in Latvia.
1. Why We Focus on 100% Birch Plywood Manufacturing
The most important characteristic of our product is its full birch construction.
At 58Northwood, 100% birch plywood means that all wood veneer layers, including the face, reverse and internal core layers, are made from birch.
This is different from plywood that uses birch face veneers with poplar, eucalyptus or other wood species in the core.
For professional buyers, understanding this difference is essential.
The wood species used in the internal construction can influence the characteristics, machining behaviour and intended applications of the finished panel.
Our manufacturing process is therefore built around birch veneer production and the preparation of both face and core veneers within our own factory.
Learn more about our 100% Birch Plywood products.
2. Production Starts with Birch Logs, Not Purchased Finished Panels
A genuine manufacturing operation begins with raw materials.
At our Latvian factory, birch logs are the starting point of the plywood production process.
The manufacturing sequence includes:
- Birch log sourcing and incoming inspection.
- Log preparation and rotary peeling.
- Birch veneer production.
- Veneer drying and moisture management.
- Veneer grading and sorting.
- Face and core veneer preparation.
- Adhesive application.
- Cross-grain veneer assembly.
- Cold pressing and hot pressing.
- Panel trimming and calibration.
- Surface sanding.
- Finished-panel inspection and packing.
By producing our own birch veneer, we can directly manage an important part of the manufacturing process instead of relying entirely on purchased veneers from different suppliers.
This gives us a closer connection between raw material selection, veneer quality and the final plywood construction.
Our Birch Plywood Manufacturing Process explains these production stages in greater detail.
3. What Does 100% Birch Construction Mean to Buyers?
This is one of the first questions we recommend buyers ask when evaluating a full birch plywood supplier.
A product described as birch plywood does not necessarily mean that every internal layer is birch.
Buyers should confirm:
- Face veneer species.
- Back veneer species.
- Core veneer species.
- Cross-band veneer species.
- Number and arrangement of veneer layers.
- Whether different wood species are used internally.
At 58Northwood, our product focus is 100% birch veneer construction throughout the panel.
The adhesive used to bond the veneers is a separate component of plywood manufacturing. The term 100% birch refers to the wood species used in the veneer layers, not to every material used in the finished product.
Clear product descriptions help importers avoid misunderstandings when comparing suppliers.
4. Veneer Quality: An Important Part of Finished Plywood Quality
Plywood quality begins before the hot press.
The condition of the veneer affects the appearance, construction and performance of the finished panel.
Our manufacturing process includes separate preparation and selection of face and core veneers.
Face Veneer
The face veneer is important for visible appearance and subsequent finishing.
Buyers should consider:
- Natural colour variation.
- Knots and other natural characteristics.
- Surface repairs.
- Open defects.
- Sanding condition.
- Consistency between panels.
Core Veneer
The core forms the internal structure of the plywood panel.
Important considerations include:
- Veneer thickness consistency.
- Moisture condition before assembly.
- Veneer condition and defects.
- Cross-grain arrangement.
- Core gaps and overlaps.
- Internal bonding quality.
These factors need to be considered together rather than judging plywood quality only by the appearance of the outer surface.
5. Birch Plywood Grades: BB/BB, B/BB and BB/CP
Our current product programme includes three important grade combinations.
BB/BB
Both sides are selected to BB grade.
This option is suitable for buyers requiring a similar surface appearance on both sides.
B/BB
One side is B grade and the reverse side is BB grade.
This combination can suit applications where the main visible face has higher appearance requirements.
BB/CP
One side is BB grade and the reverse side is CP grade.
This is an option for buyers who require a higher-grade face with a more economical reverse surface.
The precise grading criteria, permitted natural characteristics and repair requirements should always be confirmed against the agreed product specification and reference samples.
We encourage buyers to communicate their grading expectations before production.
6. Dimensions, Thickness and Product Specifications
Different markets and applications require different plywood dimensions.
Our current production programme focuses on the following standard panel formats:
- 2500 × 1250 mm
- 2440 × 1220 mm
Other dimensions and thickness requirements can be discussed according to production capability, order quantity and customer specifications.
Before requesting a quotation, buyers should provide the following information:
| Specification | Information required |
|---|---|
| Product | 100% Birch Plywood |
| Thickness | Required nominal thickness |
| Dimensions | Length × width |
| Face grade | BB, B or other agreed grade |
| Reverse grade | BB, CP or other agreed grade |
| Construction | Full birch veneer construction |
| Bonding | Required adhesive and bonding class |
| Surface | Sanded or other agreed finish |
| Quantity | Required cubic metres or panels |
| Destination | Final port or delivery location |
Accurate specifications allow our sales and production teams to evaluate the requirements before preparing a quotation.
For buyers with specific technical requirements, we recommend sharing a complete product specification rather than requesting a price based on thickness alone.
7. Adhesive Selection and Bonding Requirements
Adhesive selection is another important consideration when purchasing plywood.
Different applications and markets may require different bonding systems.
Our manufacturing process considers bonding options such as:
- Phenolic bonding systems.
- Melamine bonding systems.
- Urea bonding systems.
The appropriate system depends on the intended application, moisture exposure, required bonding performance and applicable product specifications.
For example, buyers purchasing plywood for interior furniture applications may have different requirements from customers purchasing panels for demanding construction or transportation applications.
Before placing an order, we recommend confirming:
- Intended application.
- Required bonding classification.
- Relevant test standards.
- Formaldehyde emission requirements.
- Any customer-specific technical conditions.
The adhesive specification and relevant test documentation should be agreed before production.
8. How We Approach Quality Control During Production
Quality inspection should not begin only when the finished panels are ready for shipment.
At 58Northwood, our quality management approach covers multiple production stages.
Raw Material Inspection
Birch species identification, material condition, dimensions and supporting raw material information are important incoming checks.
Veneer Inspection
Veneer thickness, moisture condition, surface appearance and natural defects are assessed during preparation.
Assembly Inspection
The veneer sequence, cross-grain arrangement and panel construction are important control points.
Hot Pressing
Pressing temperature, pressure and pressing time are important production parameters that influence adhesive curing and bonding performance.
Finishing and Calibration
Finished panels are checked for thickness, dimensions, flatness, edge condition and surface appearance.
Final Product Inspection
Before packing, finished panels should be assessed against the agreed specifications.
Our Factory Quality Control System provides further information about our manufacturing quality management approach.
9. What Should Buyers Check Before Approving a Plywood Shipment?
For importers and distributors, a pre-shipment inspection can help reduce misunderstandings and identify potential product issues before dispatch.
We recommend checking the following items:
Product identity
- Correct wood species.
- Correct plywood construction.
- Correct thickness.
- Correct dimensions.
Appearance
- Face and reverse grades.
- Surface repairs.
- Sanding quality.
- Visible defects.
Panel construction
- Edge appearance.
- Internal veneer arrangement, where inspection methods permit.
- Bonding quality.
- Panel flatness.
Physical measurements
- Thickness tolerance.
- Length and width.
- Moisture content.
- Other agreed technical parameters.
Packing
- Pallet stability.
- Protective wrapping.
- Edge and corner protection.
- Product identification.
- Packing marks.
The inspection method and sampling quantity should be agreed between the buyer and manufacturer before shipment.
We welcome buyers and their appointed inspection companies to discuss product inspection requirements with our factory.
10. Raw Material Traceability: From Birch Logs to Finished Panels
For European and international buyers, raw material origin and supporting documentation are increasingly important.
At 58Northwood, we are developing our material identification and production documentation around the manufacturing chain.
The traceability approach connects:
Birch Logs → Incoming Raw Material Records → Rotary-Peeled Birch Veneer → Face and Core Veneer → Plywood Production → Finished Panels → Packing → Shipment
Relevant records may include:
- Supplier identification.
- Raw material purchase documentation.
- Timber species information.
- Origin and legal sourcing documentation.
- Transportation records.
- Production batch information.
- Quality inspection records.
- Finished-product identification.
- Shipment documentation.
We also recognise the importance of applicable EU Deforestation Regulation (EUDR) requirements.
The precise due diligence obligations depend on the applicable product classification and the responsibilities of the relevant economic operator or trader.
Internal production traceability records should not be confused with a formal declaration of EUDR compliance.
Our objective is to maintain transparent records and provide relevant supporting information according to the applicable requirements.
Read more about our 100% Birch Plywood Production and Material Traceability.
11. Certifications, Testing and Technical Documentation
We understand that buyers need to review technical documentation before approving a new plywood supplier.
Our factory is working on relevant product testing, technical documentation and certification procedures.
Current documentation status: Relevant applications, preparation and testing procedures are in progress. Not all certificates, approvals or test reports have been issued.
We do not present pending applications as completed certifications.
When a buyer has a specific market or end-use requirement, we recommend confirming the applicable standard and required documentation before an order is placed.
12. Packing, Container Loading and Export Requirements
Product quality is important, but proper packing and shipment preparation are equally relevant to international buyers.
Before shipment, buyers and manufacturers should agree on:
- Pallet dimensions and construction.
- Number of panels per pallet.
- Protective wrapping.
- Edge and corner protection.
- Pallet identification.
- Container loading arrangement.
- Shipping marks.
- Packing list and commercial documentation.
The packing method should be appropriate for the panel dimensions, thickness, weight, transportation route and destination requirements.
For international orders, buyers should also confirm the required commercial and shipping documents in advance.
Our objective is to make sure the agreed product specifications and packing instructions are communicated clearly to the production and logistics teams.
13. Questions International Buyers Frequently Ask
Are you a plywood manufacturer or a trading company?
SIA 58Northwood is a plywood manufacturing company based in Latvia. Our manufacturing operation includes in-house birch log rotary peeling, veneer preparation, plywood assembly, pressing, sanding and finishing.
Is your plywood 100% birch?
Our product focus is 100% birch plywood, with birch veneer used throughout the face, reverse and internal core construction.
What grades do you offer?
Our current product programme includes BB/BB, B/BB and BB/CP. Other specifications can be discussed according to requirements.
What standard panel sizes do you produce?
Our current production programme focuses on 2500 × 1250 mm and 2440 × 1220 mm formats. Other sizes are subject to production capability and order requirements.
Can you provide technical and quality documentation?
We can discuss available product specifications, production information and supporting documentation. Specific testing and certification requirements must be confirmed according to their current status and applicable product scope.
Can buyers arrange a factory visit?
Yes. We welcome importers, distributors and industrial customers who wish to understand our manufacturing process and discuss potential cooperation.
How can buyers request a quotation?
Please provide the required thickness, dimensions, grades, bonding requirements, quantity, packing requirements and destination port. Our team can then review the specifications and discuss the quotation.
14. Building a Long-Term 100% Birch Plywood Manufacturing Operation in Latvia
At SIA 58Northwood, we believe that a reliable plywood supply relationship starts with a clear understanding of the manufacturing process.
Our focus is not simply to offer a plywood product.
We are developing an integrated manufacturing operation in Latvia, connecting birch raw materials, in-house veneer production, plywood assembly, pressing, sanding, quality inspection and shipment preparation.
Our designed production line capacity is approximately 30,000 m³ per year. This represents the designed capacity, not current achieved annual production.
As production develops, we will continue to share factual updates about manufacturing activities, quality management, equipment operation and product development.
We welcome professional plywood importers, wholesalers, distributors, furniture manufacturers and industrial customers to contact our factory.
SIA 58Northwood
100% Birch Plywood Manufacturer | Latvia | European Union
Website: https://58northplywood.com/
Email: amy@58northplywood.com
Phone: +371 2780 8236
Factory Address:
Vidzemes šoseja 47. km, Inčukalna pag., Siguldas nov., LV-2140, Latvia.
From Birch Logs to Finished Panels — 100% Birch Plywood Manufactured in Latvia.
For product enquiries, please send us your required dimensions, thickness, grades, quantity and destination port. We will be pleased to discuss your requirements directly.
Start Your First Trial Order with 58Northwood
Looking for a reliable source of 100% Birch Plywood from Latvia?
SIA 58Northwood welcomes enquiries from plywood importers, distributors and industrial buyers interested in evaluating our products.
We invite potential buyers to discuss:
- Required plywood thickness and dimensions.
- BB/BB, B/BB or BB/CP surface grades.
- Face and core veneer construction.
- Product samples and quality requirements.
- Trial order quantities and packaging specifications.
- Inspection and shipment arrangements.
Whether you are evaluating a new European plywood supplier or planning your 2027 purchasing programme, our sales team is ready to discuss your requirements.
Contact our sales team:
REQUEST A TRIAL ORDER QUOTATION
SIA 58Northwood | Latvia